Quad Surfboard Fins (4 Fins) – Perfect Flex with Honeycomb, FCS or Future sizes …
Ditch your plastic fins, and step up your game with these fiberglass honeycomb fins from Ho Stevie!
These fins are designed to generate maximum performance from your surfboard.
The honeycomb design makes the fins lightweight and responsive, providing you with the most speed, power, and flow possible.
Quad (4-fin) configuration is great for all-around performance. It gives your surfing a “tighter” feeling than with a thruster (3-fin) configuration. Great for driving and pumping down the line on fast waves, and you’ll notice more hold in barreling waves. But it’s still loose enough to get crazy with your turns and airs.
We (Ho Stevie!) design all of our products with the highest quality standards. If a fin breaks, we will replace it for free.
Join thousands of Ho Stevie! fans, and ride the best fins.
Fin Specs/Dimensions:
FRONT FINS
G5 Medium Template
Base: 113mm (4.45″)
Depth: 115mm (4.53″)
Sweep: 33°
Foil: Inner
REAR FINS
GL Template
Product Features
- Fits any surfboard that uses FCS or Future fins (select which kind) – whether it’s a shortboard, funboard, or longboard.
- Honeycomb Fiberglass design provides the perfect amount of flex. Drive down the line on a fast pointbreak, launch aerials (if you’re lucky enough to be that good), or just rip some turns at your local beachbreak.
- High-performance fins at a low price. We don’t spend millions of dollars sponsoring pro surfers… instead we pass the savings onto you.
- Lightweight, responsive, and fast.
- 1 Year Warranty – Push it to the limit! If your fins break, we’ll replace them for free.
Loading...
![Ho Stevie! Surfboard Twin Fins (2 Fins) – Keel Fins Fish Surf Boards [FCS Futures Sizes]](https://www.surfboardme.com/wp-content/uploads/2018/09/41vhAhV5KFL-250x209.jpg)
Disappointment Recently purchased these fins (futures) based on the reviews and price point. As you can see in the pics, the rear (small fins) are about 1/8″ too short and one was unevenly cut. The front (larger) fins fit into the boxes fine, but will need some sanding on the sides. Although, 3 out of 4 of the fins do not sit into the boxes flush with the board; the edges near the screw stick up which is not a desirable look nor streamlined. The fins are well designed, but the craftsmanship on the fin…
Size is incorrect After installing these, I was thinking that the fins looked strangely large. Sure enough, my set was not a replica of FCS G5 as advertised. In the attached photo you can see larger orange Ho Stevie! fin behind a black FCS factory G5 (medium) fin. The depth is approximately 4 7/8″. Maybe Ho Stevie! fins are copied from a FCS G7 or an XL fin?As other reviewers have noted, some tabs did not sit flush and I would have needed to sand them down to get a good fit. I returned them…